International Journal of Urban Management and Energy Sustainability

International Journal of Urban Management and Energy Sustainability

Analysis of the Relationship between Water Absorption, Permeable Voids and Permeability in Roller-Compacted Concrete and Its Effect on the Watertightness of Horizontal Joints

Document Type : Case Study

Authors
Department of Civil Engineering, Ke,C., Islamic Azad University, Kerman, Iran.
Abstract
Roller-compacted concrete (RCC) is widely used in dams because it can be placed rapidly, but its layer-by-layer placement creates horizontal joints that may become preferential seepage paths. How the pore-related properties of RCC relate to its permeability, and how bedding-mortar quality and placement interval govern joint watertightness, is rarely examined together. This study investigated the relationships among water absorption, permeable voids, sorptivity and the water permeability coefficient of RCC and of horizontal joints. Thirty mixtures combined three concrete cement contents, three bedding-mortar cement contents and three placement intervals, after 90 days of water curing. Absorption and permeable voids were measured according to ASTM C642, sorptivity according to ASTM C1585, and permeability under 1–5 bar water pressure using Darcy’s law at steady flow. Raising the cement content from 120 to 200 kg/m³ reduced final water absorption from 4.5% to 2.8% and lowered the permeability of unjointed concrete, and higher permeable-void content was accompanied by higher absorption. The richest mortar reduced joint permeability by 41–85% relative to the leanest one, yet jointed specimens remained more permeable than monolithic concrete. Permeability increased with placement interval, most sharply between 12 and 48 h. The sorptivity index correlated strongly with the permeability coefficient. Joint watertightness in RCC dams therefore depends jointly on pore structure, bedding-mortar richness and placement interval, and sorptivity is a simple screening indicator of joint permeability.

Graphical Abstract

Analysis of the Relationship between Water Absorption, Permeable Voids and Permeability in Roller-Compacted Concrete and Its Effect on the Watertightness of Horizontal Joints

Highlights

·         Absorption, permeable voids, sorptivity and permeability of RCC joints were related.

·         Raising cement content from 120 to 200 kg/m³ cut final water absorption to 2.8%.

·         The richest bedding mortar lowered joint permeability by 41–85% versus the leanest.

·         Joint permeability rose with lift interval, most sharply between 12 and 48 h.

·         Sorptivity correlated strongly with joint permeability (r = 0.97, n = 27).

Keywords

Aboubakr Mohammad, M. (2017). Laboratory investigation of the combined effect of metakaolin and steel fibres on the mechanical properties and durability of roller-compacted concrete pavement [Master’s thesis, University of Kurdistan]. (In Persian)
Akhoundi, M., Ramesht, M. H., Pourrostam, T., & Golsoorat Pahlaviani, A. (2021). A new method for producing environmentally friendly concrete using waste plastic (PET) particles and silica fume and investigation of its mechanical properties and durability in roller-compacted concrete pavement. Amirkabir Journal of Civil Engineering, 53(3), 1107–1116. (In Persian)
Ali, A. M., & Abbas, Z. K. (2022). Roller compacted concrete: Literature review. Journal of Engineering, 28(6), 65–83. https://doi.org/10.31026/j.eng.2022.06.06
Droz, P., Dunstan, M. R. H., Hinks, J., Sahoo, D. R., Srivastava, R. K., Dakoulas, P., Kashiwayanagi, M., & Cao, Z. (2023). Concrete dams. In [Book title and editors to be completed by the authors] (pp. 105–174). ICE Publishing. https://doi.org/10.1680/eedr.66151.105
Ettaghaei, V., Shahreza, M. S., & Tajdini, M. (2023). Final construction of elements and details of roller-compacted concrete dams. In Proceedings of the 18th National Conference on Civil Engineering, Architecture and Urban Planning. Shirvan, Iran. (In Persian)
Farnam, S. M., & Nouri, A. (2015). Construction of roller-compacted concrete dams and the use of polymer materials to improve their performance. In Proceedings of the International Conference on New Research Achievements in Civil Engineering, Architecture and Urban Planning. Tehran, Iran. (In Persian)
Rostami, S., Lakzadeh, M., & Akbari, H. (2023). Introducing methods for optimizing the mix design of self-compacting concrete. In Proceedings of the 3rd International Conference on Architecture, Civil Engineering, Urban Planning, Environment and Horizons of Islamic Art. Tabriz, Iran. (In Persian)
Sarsam, S. I., Salih, A. A., & Tawfeeq, S. D. (2014). Assessing durability of roller compacted concrete. Journal of Engineering, 20(7), 1–14. https://doi.org/10.31026/j.eng.2014.07.01
Selvam, M., Kalyan, N. S. S. P., Kandasami, R. K., & Singh, S. (2023). Assessing the effect of different compaction mechanisms on the internal structure of roller compacted concrete. Construction and Building Materials, 365, 130072. https://doi.org/10.1016/j.conbuildmat.2022.130072
Tajdini, M., Barazandeh Taj, A., & Bornaei Bojd, F. (2023). Formwork of roller-compacted concrete dams. In Proceedings of the 20th National Conference on Civil Engineering, Architecture and Urban Planning. Shirvan, Iran. (In Persian)
Tajdini, M., Goudarzi, H., & Kiani, M. R. (2023). Construction and formwork systems of roller-compacted concrete dams. In Proceedings of the 21st National Conference on Urban Planning, Architecture, Civil Engineering and Environment. Shirvan, Iran. (In Persian)
Tajdini, M., Tajallifar, N., & Hosseinzadeh, P. (2024). Construction considerations for roller-compacted concrete dams and the properties of this concrete during construction. In Proceedings of the 25th National Conference on Urban Planning, Architecture, Civil Engineering and Environment. Shirvan, Iran. (In Persian)
 
 
Volume 7, Issue 2 - Serial Number 2
Spring 2026
Pages 469-480

  • Receive Date 10 February 2026
  • Revise Date 15 April 2026
  • Accept Date 11 May 2026